Keene 20W Digital In-Wall Amplifier inc PSU & CMS8U

The Keene K-LAB-20 is compact, powerful stereo amplifier built onto a standard size UK double gang wall plate. It provides 20W (RMS per channel) of amplification eliminating the need to make space for a conventional amplifier. It draws it’s own power from an externally located mains adaptor and can be controlled by push buttons integrated into the front panel membrane and also by infra red remote. It can be switched between three audio sources; an integrated FM radio, rear line inputs and a front panel 3.5mm jack input. The amplifier uses class D digital circuitry for maximum efficiency and generates very little heat. The amplifier only requires 25mm depth and so may be either flush or surface mounted. 

Environment 

The KLAB20D is not IP rated for use in a damp environments but if due care is given to positioning 

of the amplifier and supply then it can be used in zone 3 installations. Please use a qualified electrician operating to current regulations if you intend to use this unit in a bathroom. 

Add music to your kitchen, bedroom, study, bathroom etc. This tiny wall mount amplifier fits into a standard UK two gang pattress and provides a powerful 20W RMS per channel. Choose between FM Radio, rear line input or plug your MP3 player into the front jack socket.

This kit combines the Keene Digital In-Wall Amplifier KLABKITD with a pair of 8" architectural swall/ceiling speakers CMS8U

* 20W RMS per channel

* Digital Class D design means high efficiency with minimal heat produced

* Built in FM radio (10 channel presets) 

* Front 3.5mm input jack for MP3 players 

* Rear line inputs 

* Front panel control plus Infra Red remote control

* Smooth tactile moisture resistant front panel switches

* LED's for status and confirmation

* Balance & tone adjustment 
* Flush mount or surface mount (25mm depth)