KB Sound SOUNDAROUND In Wall Multiroom WiFi and Bluetooth Amplifier
Leave a review
The standalone KB Sound SOUNDAROUND In Wall Multiroom WiFi and Bluetooth Amplifier - stream and control over WiFi all the music you want - anywhere in your home!
- Multi Room Audio
- Wireless Streaming
- Built-in Bluetooth Receiver
- Auxiliary Audio Input
- Use With Your Own Speakers
- Available With Speakers As a Bundle
- Compare The Entire KB Sound Range
|Wired Audio Input||Yes|
|Warranty||2 Year Warranty|
|Amplifier Location||In Wall|
The KB Sound SOUNDAROUND is a unique in-wall installed Bluetooth and Wireless Multiroom Audio Amplifier powered by Qualcomm AllPlay technology, providing an affordable Multiroom Audio System.
Each KB Sound SOUNDAROUND Multiroom Audio Amplifier is all contained within the wall panel which fits into a hole around the same size as a double socket, no back box is required as the unit is supplied with fitting frame.
Simply run low voltage power from the supplied transformer to the in-wall amplifier, Ethernet Cable (optional, but recommended) and the speaker cables to install Wireless Multiroom Audio in your home (speakers not included with this amplifier-only package).
The Qualcomm AllPlay App is available for both iOS & Android devices to allow this WiFi Multiroom Audio System.
From the App, you can play Internet radio via TuneIn Radio, together with music streaming services including Napster, Spotify, etc, and also local music stored on the connected device.
Just like other well-known Multiroom Audio Systems, the KB Sound SOUNDAROUND can be linked together in party mode to play the same music in every room simultaneously or if you wish you, play different music in every room from various sources.
However, unlike other Wireless Audio Systems with the in-wall amplifier you can re-stream local Bluetooth audio to any other amplifier including freestanding SOUNDAROUND Wi-Fi speakers from the range, which is a fantastic feature if, for example, you'd like to play YouTube audio into your Multiroom System.
In addition to the re-stream feature for local Bluetooth audio, this Wireless Multiroom Audio Amplifier also has the ability cast the 3.5mm audio input over Wi-Fi between other amplifiers around the home, perfect for playing vinyl or an old iPod or other MP3 device via your Multiroom System.
With simple push-button WPS Wi-Fi Protected Setup feature, dual band 2.4GHz and 5GHz Wi-Fi frequencies supported, and the ability to connect via an Ethernet Cable (recommended) directly, setting up your integrated Multiroom Audio System couldn't be simpler.
This product is available with speakers as a discounted bundle - See related products below.
- KB Sound SOUNDAROUND Multiroom Audio Amplifier (including white fascia, fitting frame and white surround)
- User and Install Manual
- Pre-wired 15Vdc Mains Transformer
- Mains Power Cable
|Amplifier Dimensions||175mm x 100mm x 37mm|
|Cut Out Dimensions||125mm x 75mm x 35mm|
|Amplifier Power||10+10 Watts at 8 Ohms or 16 + 16 Watts at 4 Ohms|
|Audio Input Signal||775 - 1000 mVrms 3.5mm jack|
|WiFi Receiver||2.4GHz G / 5GHz N|
|Ethernet LAN||RJ45 Socket (Rear)|
|App Support||Android 4.1 (minimum) / iOS 7.0 (minimum)|
|WiFi Setup||WPS / Webpage / in-App|
|Bluetooth Receiver||v4.0 A2DP 1.3 (Sink) / AVRCP 1.5 (Controller & Target)|
|Number of units per network||1-5 (WiFi only) / 10 (hard-wired Ethernet)|
Recommended Minimum Requirements
Wi-Fi Router 802.11n, with WPA2-PSK encryption (AES)
For Multiroom Audio a 5GHz router is recommend, however 2.4GHz routers can be used for single installs.
For best operation, the router should be placed at the centre of the installation or hard-wired.
Smartphone / Tablet requirements: Android 4.1 (minimum) / iOS 7.0 (minimum)